iGET SECURITY EP28
Code: 75020628
Gift with order
Buy directly from the manufacturer
Fast delivery
Own service centre
Product detailed description
iGET SECURITY EP28 - Wireless sensor cable bridging
Wireless bridge for third-party wired sensors for iGET SECURITY M5 alarm. It is used where any wired sensor from another manufacturer is installed and needs to be wirelessly connected to the iGET SECURITY M5 alarm. This "bridge" or also "converter" is universal and thanks to it it is possible to connect a multitude of sensors from other manufacturers to the M5 alarm.
Wireless bridge for third-party wired sensors for iGET SECURITY M5 alarm. It is used where any wired sensor from another manufacturer is installed and needs to be wirelessly connected to the iGET SECURITY M5 alarm. This "bridge" or also "converter" is universal and thanks to it it is possible to connect a multitude of sensors from other manufacturers to the M5 alarm.
For example, it can be used for outdoor PIR sensors and infrared gates. Once the connected sensor detects a change in status, it delivers this information via two wires to the EP28 and the EP28 uses a wireless frequency to transmit the signal to the main panel - iGET SECURITY M5.
Protection against sabotage, highest transmission security 256bit, very long battery life 5 years, alarm constantly monitors the activity of this bridge, also the signal and battery percentage.
Easy pairing to the basic alarm set using a QR code. Distance of the location from the main unit up to 1 km. Processing in modern design, environmentally friendly thanks to low energy consumption.
Main parameters:
- eP28 bridging is used where any wired sensor from another manufacturer is installed and needs to be wirelessly connected to the iGET SECURITY M5 alarm,
- use: to convert the signal from any wired sensor into a wireless signal to the iGET SECURITY M5 alarm,
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- highest wireless transmission encryption 256bit,
- battery life up to 5 years depending on the number of detections,
- sensor distance from the main unit up to 1 km,
- the iGET M5 alarm still checks the activity of this bridge, also the signal strength and the battery %,
- contains a signal LED - lights up when detected, lights up every 15 seconds when the battery is low, also serves as a test button.
- use: to convert the signal from any wired sensor into a wireless signal to the iGET SECURITY M5 alarm,
- simple extension of the basic alarm set, just scan the QR code on the sensor,
- highest wireless transmission encryption 256bit,
- battery life up to 5 years depending on the number of detections,
- sensor distance from the main unit up to 1 km,
- the iGET M5 alarm still checks the activity of this bridge, also the signal strength and the battery %,
- contains a signal LED - lights up when detected, lights up every 15 seconds when the battery is low, also serves as a test button.
Specifications:
Transmission frequency: 868.35 MHz
Security: 256 bit
Battery life: up to 5 years
Operating temperature: - 20°C ~ +50°C
Operating humidity: 5%~95%
Power: 1x 3V battery, CR123A type
Operating current: up to 100 mA
Quiescent current: 0.015 mA
Contact disconnection: as soon as the signal from the cable line is registered
Signal range to central unit: up to 1 km in line-of-sight
Sensor weight: 38g including battery
Dimensions (length x width x depth): 84 x 26 x 22.5 mm
Security: 256 bit
Battery life: up to 5 years
Operating temperature: - 20°C ~ +50°C
Operating humidity: 5%~95%
Power: 1x 3V battery, CR123A type
Operating current: up to 100 mA
Quiescent current: 0.015 mA
Contact disconnection: as soon as the signal from the cable line is registered
Signal range to central unit: up to 1 km in line-of-sight
Sensor weight: 38g including battery
Dimensions (length x width x depth): 84 x 26 x 22.5 mm
