iGET SECURITIES P1v2 - movement PIR detector
Code: 75020250
Product detailed description
Wireless PIR motion detector for iGET SECURITY M3B and M2B alarms. This PIR detector is also compatible with many other brands of alarms, please contact our technical support for compatibility information.
Main parameters
- The detector is designed for all rooms where motion detection is required
- Easy expansion of the basic alarm set
- Infrared motion detection
- Includes a signal LED - flashing indicates motion detection, constant illumination indicates low battery
- Battery life up to 2 years depending on number of detections
- two timer options, in the "T" (standard) mode - the detection takes place and then waits for 60 seconds, then the alarm can be triggered again. In "S" (Smart) mode, it counts 60 seconds from the last detection, e.g. at the 31st second of detection it starts counting from the beginning. There is less power consumption in "S" mode.
- When mounted up to 2 m high, coverage angles are: horizontal 90°, vertical 60°, coverage up to 7 m
Specifications
- Broadcast frequency: 433 MHz
- Operating temperature: - 20°C ~ +55°C
- Coding used: 1527/2262
- Operating humidity: < 75%
- Power supply voltage: 2pcs AAA batteries, type R03
- Security coverage : up to 7 m
- Signal range to central unit: up to 70 m. in direct visibility
- Battery life: up to 2 years depending on the number of switches
- Recommended mounting height: 1.7 ~ 2.2m
- Set the countdown time from the last detection: 8 sec. or 50 sec.
- Dimensions 94 x 54 x 41 mm (without wall bracket)
